Shopping Cart
0 items

Trims  tadi pagi sudah saya terima paket kiriman Asus G752VY dengan selamat....packingnya mantap dan safe..

Trusted Shopping Mart.

By Nicko

• Nicko

Paket Hypertherm Powermax 30 sudah tiba hari ini....mantap dan fast response !!!

• Aguan Viper has arrive yesterday with perfect condition as you wrote on website. Im really happy with my new Viper.

Trusted and fast response seller :)

• Rob Gerhun

SHARP LMV-42 9" x 42" Vertical Milling Machine

SHARP LMV-42 9" x 42" Vertical Milling Machine
Click to enlarge
Price: $4,000.00
Availability: In Stock
Model: Used
Manufacturer: Sharp
Average Rating: Not Rated

•ISO 9002 certified quality to industry standards
•Highest grade Meehanite® casting
•A pair of precision ABEC-7 angular contact bearings to support spindle
•The spindle is ground and chromed to fit the housing to insure runout of 0.0002" T.I.R.
•Motor shaft and variable speed drive pulleys are dynamically balanced, then chromed for flawless fit, ground ribs on inside diameter, for smooth speed changes
•Motor shaft has an oil channel in the center that is fed by grease fitting on the lower end, to keep variable speed drive pulley moving smoothing on the shaft
•Use a roller bearing for lower support of the shaft to ensure proper loading, support and alignment to prevent the shaft from being distorted by the tension of the belt, for quite, accurate operation at any speed
•High out-put double fans keep head and motor cool, to run jobs for extended periods without damaging the motor, belts and bearings
•Patented knuckle design uses 6 bolts, 3 bolts per side, securing them from the outside, it locks the head securely for better accuracy and performance
•Table and saddle backlash is controlled by double nut design, keeps leadscrew in contact with bronze nuts all times to keep backlash at 0.0008" within 20"
•Table and saddle are mounted with thrust bearings that preloaded the feed screw, eliminating end-play for precisely controlled lateral movement
•The dovetail ways are hard chrome on saddle and column
•Hand scraped saddle and knee for better oil retention to avoid chips and dirt embed in the knee and damage the sliding surface
•All wear areas are oil grooved for maximum lubrication
•One shot lubrication system, for lubrication of all ways and leadscrews

Specification Description
Table Size: 9" x 42"
Longitudinal Travel: 30"
Cross Travel: 12"
Quill Travel: 5"
Knee Travel: 16"
Spindle Taper: R-8
Spindle Speeds: 60-4,500 RPM Variable in 2 Ranges
Spindle Drive: 3 HP
Machine Weight (lbs.): 2,400
Machine Dimensions (in./W x D x H): 56-1/2 x 63 x 81

Equipped with: Brand New Best Line X Axis Power Feed, Mitutoyo LCD Quill Scale, Knee Handle, Quill Handle, Draw Bar

Write Review
Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

There are no additional images for this product.

Copyright © 2008 ACE INDO JAYA. All Rights Reserved

Head Office
Address: Jl.Sun Yat Sen No.48F
Medan 20214, Sumatera Utara, Indonesia
Phone: +626191134179
Fax: +626191139520